Activated Carbon Filter Cartridges

Primarily used to remove trace organics amenable to adsorption: - Aromatic Solvents (i.e., Benzene, Toluene, Xylene) - Polynuclear Aromatics (i.e., Naphthalene, Biphenyl's) - Chlorinated Aromatics (i.e., Chlorobenzene, PCB's, Aldrin, Endrin, Toxaphene, DDT) - Phenolics (i.e., Phenol, Cresol, Resorcinol) - High Molecular Weight Aliphatic Amines and Aromatic Amines (i.e., Aniline, Toluene, Diamine) - High Molecular Weight Ketones, Esters, Ethers, and Alcohol's (i.e., Dextran, Polyethylene) - Surfactants (i.e., Alkyl Benzene Sulfonates) - Soluble Organic Dyes (i.e., Methylene Blue, Textile Dyes) - Fuels (i.e., Gasoline, Kerosene, Oil) - Chlorinated Solvents(i.e., Carbon Tetrachloride, Perchloroethylene) - Aliphatic and Aromatic Acids (i.e., Tar Acids, Benzoic Acids). Also used for efficient dichlorination, tastes, and odors.

Disclaimer

Information and data presented here is believed to be reliable but is not a warranty of product performance. Verification testing is recommended to determine suitability for any particular use. Actual cartridge performance will vary with liquid conditions. Product
characterizations are based on the average performance of duplicate cartridge samples selected at random.

• Chemical discoloration
• Graphic & Illustration
• Petroleum (hydrocarbons)
• Plating
• Photographic
• Water Filtration

Disclaimer

Information and data presented here is believed to be reliable but is not a warranty of product performance. Verification testing is recommended to determine suitability for any particular use. Actual cartridge performance will vary with liquid conditions. Product
characterizations are based on the average performance of duplicate cartridge samples selected at random.

Effects of Acids/Alkalis

Normally used with either FDA cotton or polypropylene media but can be used with other media. Available normally 2-3/4′ O.D., but again can be manufactured larger or smaller O.D.’s. Lengths range from 3-5/8′ to 40′. Recommended max. temperature when used with Cotton media 300º F, depending upon type of core used, and Polypropylene media 200º. JFPI manufactures (3) different types of activated carbon cartridges; activated carbon paper (JPACP polypropylene, JCACP cotton), activated carbon granular (JPACG polypropylene, JCACG cotton), and activated carbon matrix (JACM).

Maximum Temperature

N/A

Disclaimer

Information and data presented here is believed to be reliable but is not a warranty of product performance. Verification testing is recommended to determine suitability for any particular use. Actual cartridge performance will vary with liquid conditions. Product
characterizations are based on the average performance of duplicate cartridge samples selected at random.

0 +

Activated Carbon Filter Cartridges Sold

0 %

Filtration Efficiency Rating

0

Total applications

Interested In Ordering?

Contact Us Today! We'll be happy to take care of you!
Contact Us
We have over 80+ trusted and professional distributors available at any location in the world. They will carry and provide every available JFPI product.

Please note, we do not sell to any end users. You will need to contact us to be referred to a JFPI approved distributor to order any products. If you are interested in becoming a JFPI approved distributor please contact us for information.